Product Description

IS type pump is a single-stage single-suction axial suction centrifugal pump for conveying liquid temperature not more than 80 ℃ suction pressure is not more than 0.3MPa, the maximum working pressure is not more than 1.6MPa clear water or physical and chemical properties similar to the liquid of the clear water, suitable for industrial and urban water supply and drainage, can also be used for irrigation and drainage of farmland, orchards.

CIS type single-stage ship centrifugal pump, performance parameters: applicable temperature range, installation dimensions and IS type single-stage single-suction centrifugal pumps are the same, suitable for ship water supply and drainage.IS, CIS pumps are in total of 29 basic models and hundreds of specifications, but they only use four shafts and four suspension parts, and the degree of parts generalization is as high as more than 4%. and four suspension components, the degree of generalization of parts is up to 92% or more.

Parameter range:

Flow Q 5.4～400m3/h

Lift H 4～125m

Model Description:

CIS100-65J-200A

CIS–Marine single-stage single-suction centrifugal pumps

100–Diameter of suction port (mm)

65–The diameter of spitting outlet (mm)

J–J indicates the use of reduced speed

Structural type:

the pump is horizontal installation, horizontal axial suction, upward radial spit. The pump is of suspended structure, and the rotor parts can be withdrawn for maintenance without dismantling the inlet and outlet pipelines. The pump is connected with the motor through ordinary flexible coupling or extended flexible coupling, the pump shaft seal adopts soft packing seal, or mechanical seal, the bearing is single-row centripetal ball bearing with lubricating oil lubrication.

Direction of rotation:

The pump rotates in clockwise direction when viewed from the motor end.

Material of main parts: The material of overflow parts is generally ordinary gray cast iron.

Complete sets of scope: complete sets of pumps, motors, common base, couplings, etc., and also provide bottom valves, check valves, gate valves.

When ordering, please specify the material of main parts, if there are special requirements for pumps and motors, you can consult with the company about the technical requirements.

440V, 220V, 60Hz, 50Hz power supply can be configured according to customer requirements.

Technical Parameters